Ghost Immobiliser Fitter
Ghost immobilisers can be an extremely effective method to safeguard your vehicle from theft. They prevent vehicles from being started until the correct code is entered. They can be used to remotely track a vehicle. They are getting more and more popular and a lot of insurance companies offer discounts to drivers with these systems fitted.
It is tamper-proof.
The Ghost Immobiliser is an advanced security device that prevents your vehicle from starting unless the unique PIN code is entered, or a beacon is visible. The system is completely discreet and can be customised to suit your vehicle which makes it a highly efficient anti-theft device. After installation, it is crucial to test the system to make sure that it's functioning properly. By entering the PIN as you start the engine is an easy method to verify that the system has been installed correctly. Regular testing can identify any issues or problems with the system as early as it is possible.
The system communicates directly with the ECU and will not allow your car to start unless you enter the proper sequence. This can be done by using the electronic buttons on your steering wheel or through a smartphone app. Its tamper-proof design and low profile make it difficult for thieves to find or remove. It can also be used as beacons to determine the location of your vehicle. It is a great solution for protecting valuable vehicles that have been modified or for those who wish to secure their expensive or valuable cars.
This tamper-proof device makes use of the buttons on your steering wheel to create an exclusive sequence that only you can identify. It is mathematically impossible for thieves to guess and can be changed easily with a reset code. It can be installed by a technician in the majority of vehicles.
After you have installed the device, you will have to connect it to a power source and grounding point. To identify the wires required to connect the device, obtain the wiring diagram of your vehicle. Make sure ghost immobiliser near me insulate your connections with heat shrink tubing or insulation tape to prevent short circuits and electrical damage. You should also double-check the connections and mountings for any signs of tampering by thieves.
The Ghost 2 immobiliser cost can also be set to Service/Valet mode in older vehicles that require the battery isolation to perform maintenance or service. This will disable the device by using an individual pin code, stopping it from being turned back on by thieves.
Wireless
Ghost immobilisers aren't spotted by thieves, unlike other anti-theft devices. They can be installed in a variety of vehicles and shield them from hacking, key cloning and signal relay attack. They also connect to the CAN network and can be used to track a vehicle remotely. They can also notify owners instantly if their car is stolen. Some insurance companies offer discounts for customers who purchase them. It is the most effective method to stop car theft.
The Ghost II immobiliser is an inexpensive and easy solution to keep your vehicle safe from theft. It is wireless and compatible with most cars. It is weatherproof, tamper-proof and compatible with any vehicle. It comes with a 3-year guarantee. Contrary to other security products that are available, the Ghost II does not require any additional wiring or other external components. Its unique pin-code sequence protects against key cloning and theft by preventing your car from starting until a special disarming sequence is entered. This sequence can range between one and 20 buttons, which means that thieves will need to spend longer trying to crack the code before they can leave.
The Ghost II can also block signals coming from a key fob. It can tell if a key fob has been stolen or hacked and disable the engine with an alarm. It can also stop the use of signal relay devices, which are commonly used by organised car thieves to gain access to vehicles.
It is crucial to test your Ghost Immobiliser system to ensure that it's working properly. This will allow you to identify any issues early and address them before they become a significant problem. It is a good idea to test the system by entering the PIN code and then starting the engine as part of your regular vehicle inspections.
It is crucial to put the immobiliser unit in a hidden location so that it is difficult for thieves to access. If you can, place the unit behind your dash with cable ties. Make sure that all connections are properly insulated and won't be tampered with by thieves. Also, check the mounting position to ensure that it is safe.
It is compatible with a range of vehicles.
The ghost immobiliser is an efficient security device that will help prevent car theft. It works by preventing your car from beginning until you enter the correct pin code. The code can be generated by pressing a set of existing buttons on your steering wheel, door panel or central console. The immobiliser can be reprogrammed at any time by the owner. It is secure against tampering. It also guards against key-cloning and hacking.
It is recommended to employ an expert to install the Ghost immobiliser. This is because the process of installation is complex and any errors can render the device useless or even cause damage to your vehicle. Additionally, a DIY installation could invalidate warranties for both the Ghost Immobiliser and your vehicle.
The best way to start is to find the wiring diagram for your vehicle model. This will provide a roadmap for locating the CAN H and L wires, which are connections to the immobiliser. Make note of these wires once you have identified them to ensure that they don't become disconnected accidentally during installation. Also, make sure you choose a safe and reliable grounding point for the system.
Once the wires are connected, it's recommended to check the immobiliser to make sure that everything is working correctly. After that, you can enter the PIN code to start your engine and check if it runs correctly. It is also a good idea to test the immobiliser on a regular basis to ensure that it is working in the way it was intended to.
The ghost immobiliser is unique in that it doesn't need LED indicators or keyfobs. It can be disarmed with a specific sequence on your door panel, steering wheel or the centre console. The immobiliser is also tamper-proof and does not leave any trace of installation behind which makes it difficult for thieves to locate or disarm. Furthermore it can be used to enhance the security of your vehicle in the event of a burglary, and is recommended by a variety of insurance companies.
It is easy to install
The Ghost immobiliser is an advanced device that keeps your vehicle safe from even the most skilled thieves. It stops your vehicle from starting until a distinct PIN or sequence is entered along with the key fob. This blocks hacking, cloning and even key theft. Thieves aren't able to steal your car. It makes use of a variety sensors to detect attempts to drive away and it can notify the owner or police in the case of the tampering.
Installing a Ghost Immobiliser can be difficult, especially for those who have not installed alarms or security systems before. It is essential to have the right equipment and materials for a successful installation. A multimeter is a great tool to check electrical values, and cable ties and insulation tape can protect connections. The user's manual for Ghost immobiliser offers specific instructions specifically tailored to the model of your vehicle and wiring.
During the process of installation, it's important to double-check the positions of the CAN H and CAN L wires to ensure that they are in the correct locations. They are vital for powering the immobiliser therefore, any error could lead to malfunctions or system failures. You should also label the wires using a piece of tape or labels to keep track of the wires. Finally, you should identify a consistent source of 12V power and an earthing point.
Once you've found the right location, you're now ready to begin to assemble the ghost immobiliser. To avoid airbags that are not properly connected or short circuits deployment, you'll have to disconnect your battery first. Then, you can begin connecting the wires. Make sure you follow the steps in the user guide to ensure a safe and secure installation.
After you've completed the wiring After you have completed the wiring, connect the Ghost immobiliser using CAN to the engine control unit. It will be a challenge for thieves, since the device is directly connected to the engine control unit, and it is not possible to remove or disable it. It's also tamper-proof and the only way to disable it is by entering a personal pin number. The pin code is only available to the car's owner and the installer.
You can also utilize the Ghost immobiliser to temporarily allow another person to drive your car for a short period in the event that you're away for work or need an emergency service. This feature is called Service/Valet mode, and you can activate it by using a mobile app or the key fob.